IronBull 60-Inch Flail Mower for Skid Steers💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on ironbull.ca →
Overview
IronBull's 60-inch flail mower is a compact hydraulic flail attachment for smaller skid steers on roadside mowing, right-of-way maintenance, and residential brush clearing. Unlike rotary cutters, flail mowers drop shredded material rather than throwing it, making them safer near roads and populated areas. Ships free from IronBull Canada.
Canada Availability
Available direct from IronBull Canada (ironbull.ca) with Canadian shipping included.
Key Facts
- Working width: 60 inches
- Type: hydraulic flail mower
- Application: roadside mowing, right-of-way, residential brush
- Drive: hydraulic motor
- Mount: universal skid steer quick attach (SSQA)
- Weight: 575–1500 lbs
- Hydraulic flow: 15–25 GPM
✅ Specs sourced from ironbull.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You operate a mini skid steer (Dingo, Boxer, Toro) and need a mowing attachment that fits the weight class
- Tight spaces, urban landscaping, or orchard row maintenance where a full-size machine can't maneuver
- You want contained discharge for safe operation near buildings, fences, or people
⛔ Skip if…
- You run a full-size skid steer — a standard flail mower gives better productivity and coverage
- Heavy brush is your main target — mini flails are built for grass and light vegetation only
🔍 Also consider…
- Standard flail mower sized for your full-size skid steer if applicable
- Rotary cutter for light brush on mini skid steers with appropriate flow
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/ironbull-flail-mower-60/
