TMG-SFM48 48-Inch Flail Mower for Skid Steers💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on tmgindustrial.ca →
Overview
The TMG-SFM48 is a 48-inch hydraulic flail mower for compact to mid-size skid steers doing light brush clearing, pasture maintenance, and ditch cleaning. At 48 inches it works well in tighter spaces — between fence rows, along embankments, and in areas where a wider deck would be unwieldy. The flail rotor mulches cut material in place rather than throwing it, which is safer near roads and structures. Requires high-flow hydraulics. Available direct from TMG Industrial Canada with shipping to most Canadian locations.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Model: TMG-SFM48
- Working width: 48 inches
- Type: hydraulic flail mower
- Drive: high-flow hydraulic
- Application: brush, pasture maintenance
- Mount: universal SSQA
- Weight: 525–1350 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
✅ Buy if…
- You operate a mini skid steer (Dingo, Boxer, Toro) and need a mowing attachment that fits the weight class
- Tight spaces, urban landscaping, or orchard row maintenance where a full-size machine can't maneuver
- You want contained discharge for safe operation near buildings, fences, or people
⛔ Skip if…
- You run a full-size skid steer — a standard flail mower gives better productivity and coverage
- Heavy brush is your main target — mini flails are built for grass and light vegetation only
🔍 Also consider…
- Standard flail mower sized for your full-size skid steer if applicable
- Rotary cutter for light brush on mini skid steers with appropriate flow
🔧 Machine Compatibility
Compact size fits small-frame machines (S70–S185 class) as well as mid and large-frame loaders. Universal SSQA mount works with all major brands.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/tmg-sfm48-flail-mower/
