TMG Industrial SFM72 Offset Flail Mower💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on tmgindustrial.com →
Overview
The 72-inch-inch flail mower cuts grass, light brush, and overgrown vegetation to a fine mulch on Canadian roadsides, municipal right-of-ways, and acreages. TMG Industrial is a Canadian company based in BC with a nationwide dealer network and direct online sales, making parts and support easy to access across Canada. Flail knives re-ingest cuttings for finer mulching than rotary cutters, and the enclosed deck reduces throw hazard. Requires adequate hydraulic flow. Available from TMG Industrial Canada (ships nationally).
Canada Availability
Available from TMG Industrial Canada (ships nationally).
Key Facts
- Model: TMG Industrial SFM72 Offset
- Working width: 72 inches
- Type: offset hydraulic flail mower
- Drive: hydraulic flail rotor
- Mount: universal SSQA quick attach
- Weight: 700–1800 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You mow ditches, roadsides, pastures, or acreage where contained discharge matters — flails don't throw rocks
- Golf courses, parks, municipal rights-of-way, or any site where flying debris risk is a concern
- You want a mulching cut rather than a raw-discharge mow — flails produce finer material
⛔ Skip if…
- Pure production speed is your goal and debris risk is low — a rotary cutter covers more ground per hour
- Heavy brush over 3 inches is your main vegetation — a brush cutter or mulcher handles that range better
🔍 Also consider…
- Rotary cutter for faster coverage on low-risk open land
- Brush mulcher for heavy overgrowth and woody vegetation
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/tmg-sfm72-offset-flail-mower/
