TMG-SFM96 96-Inch Flail Mower for Skid Steers💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on tmgindustrial.ca →
Overview
The TMG-SFM96 is a 96-inch hydraulic flail mower for large-frame, high-flow skid steers doing production-scale pasture clearing, municipal roadside maintenance, and commercial vegetation management. At 96 inches the cutting width is one of the widest available in a skid steer flail mower — each pass covers a full 8 feet of ground. The flail rotor mulches material in place rather than throwing clippings. This size requires a machine with adequate hydraulic flow and lift capacity to handle the attachment weight. Sold direct from TMG Industrial Canada with Canadian shipping.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Model: TMG-SFM96
- Working width: 96 inches
- Type: hydraulic flail mower
- Drive: high-flow hydraulic
- Application: brush, pasture maintenance
- Mount: universal SSQA
- Weight: 925–2400 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
✅ Buy if…
- You're processing heavy brush, overgrown saplings, and thick vegetation that standard-flow flails can't handle
- Your machine has high-flow hydraulics and you want the productivity gain on large acreage or contract work
- You're doing reclamation, right-of-way clearing, or heavy vegetation management regularly
⛔ Skip if…
- Your machine is standard-flow — high-flow flails won't perform better and may overheat
- Light grass mowing is your primary use — a standard flail mower is simpler and less expensive
🔍 Also consider…
- Standard flail mower for light-to-medium vegetation on standard-flow machines
- Brush mulcher for woody material over 4 inches that high-flow flails still struggle with
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/tmg-sfm96-flail-mower/
