Virnig V60 84 Inch Flail Mower🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on virnig.com →
Overview
Virnig's V60 series 84-inch flail mower is designed for large-frame, high-flow skid steers. Virnig Manufacturing builds direct-to-buyer attachments with strong quality control. The 84-inch cut width suits wide vegetation management work for highway, acreage, and utility corridor applications. Available from Virnig with shipping to Canada.
Canada Availability
Available from Virnig Manufacturing (ships to Canada).
Key Facts
- Brand: Virnig Manufacturing
- Series: V60 (high-flow, large-frame)
- Working width: 84 inches
- Type: hydraulic flail mower
- Drive: high-flow hydraulic motor
- Mount: universal SSQA quick attach
- Weight: 825–2100 lbs
- Hydraulic flow: 20–30 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You're processing heavy brush, overgrown saplings, and thick vegetation that standard-flow flails can't handle
- Your machine has high-flow hydraulics and you want the productivity gain on large acreage or contract work
- You're doing reclamation, right-of-way clearing, or heavy vegetation management regularly
⛔ Skip if…
- Your machine is standard-flow — high-flow flails won't perform better and may overheat
- Light grass mowing is your primary use — a standard flail mower is simpler and less expensive
🔍 Also consider…
- Standard flail mower for light-to-medium vegetation on standard-flow machines
- Brush mulcher for woody material over 4 inches that high-flow flails still struggle with
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/virnig-v60-flail-mower-84/
