Werk-Brau 72-Inch Flail Mower for Skid Steers🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on werk-brau.com →
Overview
The 72-inch-inch flail mower cuts grass, light brush, and overgrown vegetation to a fine mulch on Canadian roadsides, municipal right-of-ways, and acreages. Werk-Brau (Ohio) builds OEM-quality attachments available through Canadian dealers, with a strong track record on Canadian construction sites. Flail knives re-ingest cuttings for finer mulching than rotary cutters, and the enclosed deck reduces throw hazard. Requires adequate hydraulic flow. Available in Canada through Werk-Brau dealers.
Canada Availability
Available in Canada through Werk-Brau dealers.
Key Facts
- Working width: 72 inches
- Type: hydraulic flail mower
- Drive: high-flow hydraulic
- Application: brush, pasture, rights-of-way
- Mount: universal SSQA
- Weight: 700–1800 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
✅ Buy if…
- You're processing heavy brush, overgrown saplings, and thick vegetation that standard-flow flails can't handle
- Your machine has high-flow hydraulics and you want the productivity gain on large acreage or contract work
- You're doing reclamation, right-of-way clearing, or heavy vegetation management regularly
⛔ Skip if…
- Your machine is standard-flow — high-flow flails won't perform better and may overheat
- Light grass mowing is your primary use — a standard flail mower is simpler and less expensive
🔍 Also consider…
- Standard flail mower for light-to-medium vegetation on standard-flow machines
- Brush mulcher for woody material over 4 inches that high-flow flails still struggle with
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/werk-brau-flail-mower-72/
