Paladin Attachments Skid Steer Hydraulic Breaker💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on paladin-brands.com →
Overview
Paladin Attachments offers hydraulic breakers for skid steers as part of their broad attachment portfolio. The Paladin group has strong Canadian distribution through multiple dealer brands. Their hydraulic breaker uses standard high-flow auxiliary hydraulics and universal SSQA mounting for compatibility with most Canadian skid steer brands.
Canada Availability
Available through Paladin Attachments dealers across Canada.
Key Facts
- Brand: Paladin Attachments
- Type: hydraulic breaker
- Drive: high-flow hydraulic auxiliary
- Mount: universal SSQA quick attach
- Application: concrete and rock demolition on Canadian job sites
- Weight: 700–1400 lbs
- Hydraulic flow: 15–20 GPM
Is This Right For You?
✅ Buy if…
- You break concrete curbs, asphalt patches, frost, or light stone on compact to medium skid steers
- Occasional demolition is part of your work mix and you want a simple, reliable hammer without high cost
- Your machine has standard hydraulic flow — light-duty breakers don't require high-flow circuits
⛔ Skip if…
- Reinforced concrete foundations or large rock are your main targets — a medium or heavy hammer is needed
- You run a large-frame machine — a light-duty breaker is undersized and won't give adequate productivity
🔍 Also consider…
- Medium-duty hydraulic breaker for larger machines and harder material
- Heavy-duty breaker for large-frame machines and heavy demolition
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Paladin Attachments in Canada
Paladin Attachments — now part of Epiroc — manufactures under multiple brands including Bradco, McMillen, and Sweepster. Their products are distributed across North America with Canadian dealers stocking common models.
Care & Maintenance
- Check nitrogen buffer gas pressure at the start of every season and whenever impact energy feels reduced — low gas pressure is the most common cause of reduced performance
- Lubricate the tool (chisel) bushing and retainer pins before every use — dry bushings accelerate side-loading wear on both the bushing and the tool shank
- Inspect the lower bushing for wear after every 40 hours — a worn bushing allows chisel wobble, reducing impact energy delivery and accelerating shank wear
- Never blank-fire the breaker — operating without material contact destroys the internal valve in minutes; this is the most common cause of breaker failures
- Verify return-line back-pressure annually — back-pressure exceeding the breaker's rated limit destroys the valve seal progressively and may not be immediately obvious
How to Connect
- Attach breaker using Bob-Tach
- Connect single aux hydraulic circuit (breakers use one-way flow)
- Set machine to single-action aux mode if available
- Run 5 seconds at idle before working to allow oil to circulate
⚠ Safety NoteBreakers use single-direction flow. Do not run breaker in same position for more than 30 seconds — move to avoid blank-firing damage.
⚒️ Before You Buy a Hydraulic Breaker
Breaker sizing and hydraulic matching are critical — an oversized or underpowered breaker wears out faster and can damage your machine.
- Size the breaker class to your machine's rated operating capacity (ROC) Breaker sizing guide →
- Verify your machine's GPM and PSI output match the breaker's requirement Hydraulic flow guide →
- Confirm anti-blank-fire protection — protects both the breaker and your machine
Find a Breaker Dealer →
Complete the job — you might also need:
More from Paladin Attachments
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/hydraulic-breakers/paladin-hydraulic-breaker/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
