Denis Cimaf 180D Skid Steer Forestry Mulcher⭐ Premium
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✗ Too heavy for small & mid-frame machines
✓ Requires large-frame or XL machine
View on shearforce.ca →
Overview
The Denis Cimaf 180D is a heavy-duty forestry mulching head for skid steers and compact track loaders. Denis Cimaf is a Canadian forestry equipment manufacturer known for their bite-limiting cutterhead design, which protects the rotor from oversized material and reduces maintenance downtime. The 180D is used by land clearing contractors and forestry operators across Canada. Available through Shear Force Equipment, a Canadian distributor.
Canada Availability
Available through Shear Force Equipment (shearforce.ca), a Canadian distributor of Denis Cimaf forestry equipment.
Key Facts
- Model: 180D
- Brand: Denis Cimaf
- Type: skid steer / compact carrier forestry mulcher
- Cutterhead design: bite-limiting for rotor protection
- Drive: high-flow hydraulic
- Application: land clearing, forestry, pipeline corridor management
- Available through Canadian distributors
- Weight: 1200–3500 lbs
- Hydraulic flow: 25–45 GPM (high-flow)
Is This Right For You?
✅ Buy if…
- You're processing brush, saplings, and slash in place — drum mulchers handle mixed material up to 6 inches
- Land clearing, pipeline corridor prep, or right-of-way maintenance where material stays on site
- Your machine has the high-flow hydraulics required — drum mulchers typically need 25-35+ GPM
⛔ Skip if…
- Your skid steer is standard-flow — most drum mulchers require high-flow to run efficiently
- Tree diameter exceeds 8 inches regularly — a dedicated forestry mulcher or felling head handles larger material
🔍 Also consider…
- Forestry mulcher for heavier timber and larger diameter material
- Rotary cutter or brush cutter if material size is consistently under 3 inches
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Denis Cimaf in Canada
Denis Cimaf is a Quebec-based manufacturer and one of the premium names in forestry mulching. Made in Canada, their mulchers are built for North American forest conditions — dense hardwood, mixed brush, and the kind of material that separates quality equipment from import brands. Denis Cimaf is a serious choice for full-time land clearing and forestry contractors.
Care & Maintenance
- Inspect carbide hammers or teeth before every use — missing or broken hammers unbalance the rotor and can cause catastrophic motor damage at high RPM
- Replace worn teeth in matched sets across the rotor — even one missing hammer creates vibration destructive enough to damage drive motor bearings
- Grease rotor shaft bearing housings every 4–8 hours of operation, or more frequently in dusty or abrasive conditions
- Clean packed fibrous material from the housing interior and rotor after every session — buildup adds asymmetric weight and creates rotor imbalance
- Check the hydraulic motor case drain line monthly for leakage — a restricted or failed case drain causes motor shaft seal failure and internal leakage
How to Connect
- Attach mulcher head using Bob-Tach
- Connect high-flow hydraulic couplers
- Verify rotor direction — debris should eject downward, not toward operator
- Run at idle for 30 seconds before engaging rotor at working speed
⚠ Safety NoteMulchers are high-flow only (25-45 GPM+) — do not run on standard flow machines. Wear full PPE — flying debris risk.
🌲 Before You Buy a Mulcher
Mulchers are high-investment, high-flow attachments — the wrong match to your machine costs you in performance and potentially in repairs.
- Confirm your machine delivers 20–40 GPM high-flow Check your flow spec →
- Match drum vs disc mulcher to your material (trees vs brush) Drum vs disc guide →
- Verify carbide tooth compatibility for your primary soil/rock type
Find a Mulcher Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/mulchers/denis-cimaf-180d-mulcher/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
