Fecon BH074SS Bull Hog Skid Steer Mulcher⭐ Premium
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
View on fecon.com →
Overview
The Fecon BH074SS is a high-flow forestry mulcher for large-frame skid steers, with a 60-inch working width and 30–45 GPM flow range. The Bull Hog series is Fecon's best-known product line, used extensively in North American land clearing, pipeline corridor management, and utility right-of-way work. Double-tipped carbide cutting teeth handle brush, trees up to 8 inches in diameter, and stumps. Available through authorized Fecon dealers in Canada.
Canada Availability
Available through authorized Fecon dealers in Canada and North American distributors. Contact Fecon directly for Canadian dealer locations.
Key Facts
- Model: BH074SS
- Working width: 60 inches
- Overall width: 76 inches
- Flow range: 30–45 GPM (high-flow)
- Tooth type: double-tipped carbide
- Maximum cutting diameter: 8 inches
- Weight: approximately 2,790 lbs
- Application: forestry mulching, land clearing, right-of-way
✅ Specs sourced from fecon.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You're processing brush, saplings, and slash in place — drum mulchers handle mixed material up to 6 inches
- Land clearing, pipeline corridor prep, or right-of-way maintenance where material stays on site
- Your machine has the high-flow hydraulics required — drum mulchers typically need 25-35+ GPM
⛔ Skip if…
- Your skid steer is standard-flow — most drum mulchers require high-flow to run efficiently
- Tree diameter exceeds 8 inches regularly — a dedicated forestry mulcher or felling head handles larger material
🔍 Also consider…
- Forestry mulcher for heavier timber and larger diameter material
- Rotary cutter or brush cutter if material size is consistently under 3 inches
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Fecon in Canada
Fecon is a US manufacturer specializing in forestry and land clearing equipment. Their Bull Hog and BTX mulching heads are well-regarded by professional land clearing contractors in Canada. Fecon products are available through select Canadian dealers, primarily in regions with active forestry and brush management markets.
Care & Maintenance
- Inspect carbide hammers or teeth before every use — missing or broken hammers unbalance the rotor and can cause catastrophic motor damage at high RPM
- Replace worn teeth in matched sets across the rotor — even one missing hammer creates vibration destructive enough to damage drive motor bearings
- Grease rotor shaft bearing housings every 4–8 hours of operation, or more frequently in dusty or abrasive conditions
- Clean packed fibrous material from the housing interior and rotor after every session — buildup adds asymmetric weight and creates rotor imbalance
- Check the hydraulic motor case drain line monthly for leakage — a restricted or failed case drain causes motor shaft seal failure and internal leakage
How to Connect
- Attach mulcher head using Bob-Tach
- Connect high-flow hydraulic couplers
- Verify rotor direction — debris should eject downward, not toward operator
- Run at idle for 30 seconds before engaging rotor at working speed
⚠ Safety NoteMulchers are high-flow only (25-45 GPM+) — do not run on standard flow machines. Wear full PPE — flying debris risk.
🌲 Before You Buy a Mulcher
Mulchers are high-investment, high-flow attachments — the wrong match to your machine costs you in performance and potentially in repairs.
- Confirm your machine delivers 20–40 GPM high-flow Check your flow spec →
- Match drum vs disc mulcher to your material (trees vs brush) Drum vs disc guide →
- Verify carbide tooth compatibility for your primary soil/rock type
Find a Mulcher Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/mulchers/fecon-bh074ss-mulcher/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
