TMG-WC42S 4-Inch Skid Steer Wood Chipper💚 Budget
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✗ Too heavy for small & mid-frame machines
✓ Requires large-frame or XL machine
View on tmgindustrial.ca →
Overview
The TMG-WC42S is a gravity-fed skid steer wood chipper with a 4-inch chipping capacity, driven by a high-torque cycloidal hydraulic motor. It accepts branches and brush through the gravity-fed hopper and ejects chips through a 59-inch rotating discharge chute that turns a full 360 degrees — directing chips directly into a dump trailer or pickup box. Chips can be used as mulch for landscaping. Sold direct from TMG Industrial Canada with Canadian shipping and free pickup at select locations.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping and free pickup at select locations.
Key Facts
- Model: TMG-WC42S
- Chipping capacity: 4 inches
- Feed type: gravity-fed
- Drive: direct drive high-torque cycloidal hydraulic motor
- Discharge chute: 59 inches, 360-degree rotation
- Application: branches, brush, site cleanup, chip production for mulch
- Couplers: flat-faced included
- Mount: universal SSQA skid steer quick attach
- Weight: 1200–3500 lbs
- Hydraulic flow: 25–45 GPM (high-flow)
Is This Right For You?
✅ Buy if…
- You need to chip brush, limbs, and slash into transportable material rather than mulching in place
- Urban tree service, brush disposal contracts, or sites where leaving mulched material is unacceptable
- You want to produce usable wood chip material for landscaping or disposal
⛔ Skip if…
- In-place mulching is acceptable — a drum mulcher processes faster without relocating the machine
- You're clearing large acreage where chip transport logistics don't make sense
🔍 Also consider…
- Drum mulcher for in-place land clearing and brush processing
- Forestry mulcher for high-volume stand clearing where material stays on site
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect carbide hammers or teeth before every use — missing or broken hammers unbalance the rotor and can cause catastrophic motor damage at high RPM
- Replace worn teeth in matched sets across the rotor — even one missing hammer creates vibration destructive enough to damage drive motor bearings
- Grease rotor shaft bearing housings every 4–8 hours of operation, or more frequently in dusty or abrasive conditions
- Clean packed fibrous material from the housing interior and rotor after every session — buildup adds asymmetric weight and creates rotor imbalance
- Check the hydraulic motor case drain line monthly for leakage — a restricted or failed case drain causes motor shaft seal failure and internal leakage
How to Connect
- Attach mulcher head using Bob-Tach
- Connect high-flow hydraulic couplers
- Verify rotor direction — debris should eject downward, not toward operator
- Run at idle for 30 seconds before engaging rotor at working speed
⚠ Safety NoteMulchers are high-flow only (25-45 GPM+) — do not run on standard flow machines. Wear full PPE — flying debris risk.
🌲 Before You Buy a Mulcher
Mulchers are high-investment, high-flow attachments — the wrong match to your machine costs you in performance and potentially in repairs.
- Confirm your machine delivers 20–40 GPM high-flow Check your flow spec →
- Match drum vs disc mulcher to your material (trees vs brush) Drum vs disc guide →
- Verify carbide tooth compatibility for your primary soil/rock type
Find a Mulcher Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/mulchers/tmg-wc42s-wood-chipper/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
