Skid Pro HD Pallet Fork Grapple for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on skidpro.com →
Overview
Skid Pro's heavy-duty pallet fork grapple combines standard pallet forks with an overhead hydraulic grapple bar that clamps down to secure unstable loads. This prevents loads from shifting during transport — critical for moving unsecured lumber bundles, pipe, bales, and logs. The HD model uses heavier steel construction than Skid Pro's standard pallet fork grapple. Available through Skid Pro's Canadian distributors.
Canada Availability
Available in Canada through Skid Pro's authorized Canadian distributors.
Key Facts
- Type: pallet fork grapple (forks + overhead hydraulic grapple bar)
- Application: securing unstable loads — lumber, bales, pipe, logs
- Drive: hydraulic overhead grapple bar
- Construction: heavy-duty steel (HD model)
- Mount: universal skid steer quick attach (SSQA)
- Typical frame weight: 600–750 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
✅ Specs sourced from skidpro.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You lift pallets, bundles, or stacked material regularly and want the machine you already own to do it
- Quick-attach compatibility means you can swap in forks without a second machine
⛔ Skip if…
- Your loads are heavy round stock or poles — pipe grapple tines handle those better
- The fork weight would push your machine near its ROC limit for the loads you're lifting
🔍 Also consider…
- Bale spear for farming operations with round or square bales
- Pipe grapple forks for cylindrical or irregular stock
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Skid Pro in Canada
Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
⚠ Safety NoteNever exceed the rated capacity of the fork frame — check the frame decal
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/skid-pro-pallet-forks-grapple-hd/
