Werk-Brau 72-Inch Pallet Forks for Skid Steers🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on werk-brau.com →
Overview
Werk-Brau's 72-inch pallet forks extend tine length for handling oversized loads — long lumber bundles, pipe, structural steel, and double-stacked industrial pallets. The 72-inch tines provide 12 inches more reach than the standard 60-inch model, improving load stability on longer materials. Adjustable tine spacing fits different load widths. Built to Werk-Brau's industrial heavy-duty steel standards at their Ohio facility. A practical choice for contractors and builders handling non-standard load lengths. Available through authorized Werk-Brau dealers in Canada.
Canada Availability
Available in Canada through Werk-Brau dealers.
Key Facts
- Tine length: 72 inches
- Application: lumber, pipe, long loads
- Mount: universal SSQA
- Typical frame weight: 400–550 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
⛔ Skip if…
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
🔍 Also consider…
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
⚠ Safety NoteNever exceed the rated capacity of the fork frame — check the frame decal
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/werk-brau-pallet-forks-72/
