Arctic Snow and Ice Wide Skid Steer Snow Blade⭐ Premium
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on arctic-snow.com →
Overview
Arctic Snow and Ice Control products are manufactured in Canada and designed for severe winter conditions. Their wide skid steer snow blade is intended for high-production commercial snow removal on large parking lots and industrial sites across Canada. The wide blade maximizes clearing width per pass for efficient operation in Canadian snowfall conditions.
Canada Availability
Canadian-manufactured by Arctic Snow and Ice Control. Available through Arctic dealers in Canada.
Key Facts
- Brand: Arctic Snow and Ice Control
- Type: wide hydraulic snow blade
- Drive: hydraulic angle adjustment
- Mount: universal SSQA quick attach
- Application: large parking lots, industrial sites, high-production Canadian snow removal
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
✅ Buy if…
- You clear flat open lots, loading docks, or laneways and want the lowest-cost blade option
- Your site has a natural drop zone and you push in one direction — no angling needed
- You're adding snow clearing to a machine you already own without a big attachment investment
⛔ Skip if…
- You need to cast snow to one side or work curbed areas — an angle blade handles that better
- You clear large commercial lots — a box pusher moves more snow per pass
🔍 Also consider…
- Angle/trip-edge snow blade for road clearing with directional control
- Box snow pusher for large commercial parking lots
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Arctic Snow and Ice in Canada
Arctic Snow & Ice Control is a US manufacturer specializing in sectional steel snow pushers and box blades for commercial snow management. Their products are available through dealers in Canada and are built for the heavy-use demands of commercial parking lot and property maintenance operations.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Arctic Snow and Ice
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/arctic-snow-blade-wide/
