Blue Diamond 108-Inch Snow Blade for Skid Steers⭐ Premium
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on bluediamondattachments.com →
Overview
Blue Diamond's 108-inch (9-foot) snow blade is a large-format angling blade for full-size skid steers on commercial snow plowing operations. The 9-foot width speeds up large lot and roadway clearing significantly. Blue Diamond blades angle left or right hydraulically for side-cast snow control, and a replaceable cutting edge extends service life. Available through Blue Diamond's Canadian dealer network.
Canada Availability
Available in Canada through Blue Diamond Attachments authorized dealers.
Key Facts
- Working width: 108 inches (9 feet)
- Type: angle snow blade
- Hydraulics: angling left or right via auxiliary circuit
- Cutting edge: replaceable
- Mount: universal skid steer quick attach (SSQA)
- Weight: 425–1300 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Blue Diamond in Canada
Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/blue-diamond-snow-blade-108/
