SnowWolf QuattroPlow QP108 108-Inch Snow Pusher for Skid Steers⭐ Premium
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on snowwolf.com →
Overview
The SnowWolf QuattroPlow QP108 is a 108-inch (9-foot) multi-position snow plow that can switch between straight pusher, V-plow, and scoop configurations — giving the operator flexibility to handle different clearing situations with a single attachment. SnowWolf products are distributed through authorized Canadian dealers for winter contractors across Canada.
Canada Availability
Available in Canada through authorized SnowWolf dealers.
Key Facts
- Working width: 108 inches (9 feet)
- Model: QuattroPlow QP108
- Type: multi-position snow pusher/plow
- Configurations: straight, V-plow, scoop
- Application: commercial snow clearing with versatile blade positions
- Typical weight: 550–700 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
✅ Specs sourced from snowwolf.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- Your lot has uneven pavement, frost heaves, or expansion joints that a rigid pusher would dig into
- You want to minimize scraping damage to the pavement surface
⛔ Skip if…
- Your site is smooth and flat — a standard box pusher is simpler and cheaper
- The higher purchase price doesn't pencil out for occasional residential use
🔍 Also consider…
- Standard box pusher for flat, uniform lots
- Snow blade if you need angle control to push snow to a specific side
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About SnowWolf in Canada
SnowWolf is a US manufacturer focused exclusively on snow management equipment. Their UltraPlow and pusher products are known for heavy-duty construction and are used by commercial snow contractors across Canada. SnowWolf dealers are present in major Canadian markets, particularly in regions with high commercial snow clearing activity.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
How to Connect
- Back machine into push frame receiver
- Lower boom to slide trip edges into receiver arms
- Engage mounting pins or latch
- Raise slightly off ground and test trip edge reset manually if accessible
⚠ Safety NoteSnow pushers are passive (no hydraulics) on most models — mounting is mechanical only
❄️ Before You Buy a Snow Pusher
Snow pusher sizing is machine-dependent — an oversized box overloads your loader arms; undersizing means extra passes on large lots.
- Match pusher width to your machine's ROC and tipping load Attachment sizing guide →
- Trip-edge vs sectional edge — trip edge for paved lots, sectional for uneven surfaces Snow pusher guide →
- Buy before November — Canadian dealers sell out of popular sizes by mid-winter
Find a Snow Pusher Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/snowwolf-quattroplow-qp108/
.png)
.jpg)
.jpg)