Skid Pro Skid Steer Stump Grinder🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on skidpro.com →
Overview
Skid Pro's skid steer stump grinder is a high-flow attachment for grinding stumps to below grade after tree removal. Compatible with mid and large-frame skid steers. Skid Pro ships to Canada and their stump grinder is used on Canadian acreages and tree service operations. Features carbide-tipped teeth and an adjustable depth stop.
Canada Availability
Ships to Canada direct from Skid Pro. Used by Canadian tree service operators and acreage owners.
Key Facts
- Type: skid steer stump grinder
- Drive: high-flow hydraulic
- Carbide-tipped teeth
- Adjustable depth control
- Application: stump removal, acreage clearing
- SSQA universal quick attach
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
✅ Specs sourced from skidpro.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You grind hardwood stumps over 18 inches diameter — large oaks, maples, or elms that standard grinders struggle with
- Production tree service or land clearing where stump count and diameter are high
- Your large-frame skid steer has the hydraulic flow and lift capacity to run a heavy grinder effectively
⛔ Skip if…
- Most of your stumps are under 12 inches — a standard grinder completes those faster with less wear
- Your machine is compact or mid-frame — a heavy grinder may exceed carrier capacity
🔍 Also consider…
- Standard stump grinder for typical residential and light commercial stump removal
- Side-shift stump grinder if you work near obstacles frequently
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Skid Pro in Canada
Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
How to Connect
- Attach stump grinder using Bob-Tach
- Connect high-flow hydraulic couplers
- Run wheel at idle to verify direction (wheel should spin into stump, not away)
- Clear 10m radius of bystanders before grinding
⚠ Safety NoteHigh-flow required (20-40 GPM). Always wear face shield and hearing protection.
🪵 Before You Buy a Stump Grinder
Virtually all skid steer stump grinders require high-flow hydraulics — and carbide tooth condition is a major operating cost factor.
- Confirm your machine delivers 15–35 GPM high-flow Check your flow spec →
- Match cutterhead width to your typical stump diameter range
- Factor in carbide tooth replacement cost — budget $300–800/season for regular use
Find a Stump Grinder Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/stump-grinders/skid-pro-stump-grinder/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
