Blue Diamond 96-Inch Angle Broom for Skid Steers⭐ Premium
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on bluediamondattachments.com →
Overview
Blue Diamond's 96-inch angle broom is a wide-format hydraulic sweeper for full-size skid steers on large commercial sweeping operations. The 8-foot drum sweeps wide road lanes, large parking areas, and industrial floors in fewer passes. Angled orientation sweeps material to the side for efficient windrow formation. Available through Blue Diamond's authorized Canadian dealer network.
Canada Availability
Available in Canada through Blue Diamond Attachments authorized dealers.
Key Facts
- Working width: 96 inches (8 feet)
- Type: angle broom / hydraulic sweeper
- Bristle options: poly, wire, or combination
- Application: road lanes, large commercial areas, industrial floors
- Drive: hydraulic motor, angle adjustable
- Weight: 400–1200 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Blue Diamond in Canada
Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/blue-diamond-broom-96/
.jpg)
