John Deere Worksite Pro BP96 Pickup Broom🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
View on brandt.ca →
Overview
The BP96 is a 96-inch pickup broom in John Deere's Worksite Pro line — the widest standard model in the BP series. It collects swept material into an onboard hopper rather than pushing it aside, making it the right choice for tight parking lots, urban sites, and anywhere you can't leave a windrow. At 96 inches, it covers more ground per pass than the BP84 with fewer turns. Pickup brooms are heavy by nature — confirm your machine's rated operating capacity before purchasing. Used by Canadian municipalities, commercial contractors, and construction companies for spring sand cleanup, construction site sweeping, and seasonal maintenance.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro dealers.
Key Facts
- Sweeping width: 96 inches
- Type: pickup broom — collects debris into onboard hopper
- Hydraulic flow: continuous-flow auxiliary required
- Application: parking lots, urban sites, construction sweeping, spring sand cleanup
- Note: pickup brooms are heavy — verify machine ROC before purchasing
- SSQA (universal quick attach) mount
- Compatible with large-frame John Deere skid steers and CTLs
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
- You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)
⛔ Skip if…
- Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
- The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)
🔍 Also consider…
- Angle broom for high-speed open-area cleanup where windrow isn't an issue
- Sweeper with water tank if dust suppression is needed
🔧 Machine Compatibility
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/john-deere-worksite-pro-bp96-broom/
