Sweepster 96-Inch Pickup Broom for Large Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on sweepster.com →
Overview
The 96-inch-inch pickup broom sweeps and collects debris into an internal hopper, eliminating the need for manual raking after each pass. Sweepster brooms are distributed through Canadian equipment dealers with a focus on municipal and commercial sweep applications. Hydraulic conveyor deposits material into a following truck or dumpster. Common on urban construction cleanup and municipal yard maintenance. Available in Canada through Sweepster dealers.
Canada Availability
Available in Canada through Sweepster dealers.
Key Facts
- Working width: 96 inches
- Type: pickup broom with hopper
- Application: municipal sweeping, spring road sand
- Mount: universal SSQA
- Weight: 400–1200 lbs
- Hydraulic flow: 20–30 GPM
Is This Right For You?
✅ Buy if…
- You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
- You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)
⛔ Skip if…
- Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
- The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)
🔍 Also consider…
- Angle broom for high-speed open-area cleanup where windrow isn't an issue
- Sweeper with water tank if dust suppression is needed
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Sweepster in Canada
Sweepster is part of the Paladin/Epiroc family and is one of the most recognized names in angle brooms for skid steers. Sweepster brooms are available through Canadian equipment dealers and are a proven choice for municipal, commercial, and construction sweeping applications.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/sweepster-pickup-broom-96/
