TMG-PS72 72-Inch Skid Steer Pick-Up Broom with Bucket💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
View on tmgindustrial.ca →
Overview
The TMG-PS72 is a 72-inch pickup broom with an integrated bucket that sweeps and collects debris directly into the hopper without a separate container. The 22-inch diameter bristles suit skid steers from 45-75 HP running standard hydraulic flow. It handles debris, aggregate, and light waste on job sites, municipalities, and commercial properties. Direct drive from TMG Industrial Canada, available with Canadian shipping and free pickup.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping and free pickup at select locations.
Key Facts
- Model: TMG-PS72
- Sweep width: 72 inches
- Brush diameter: 22 inches
- Bucket: integrated collection bucket
- Drive: standard hydraulic flow
- Recommended HP: 45-75 HP skid steers
- Application: debris collection, aggregate, municipal cleanup
- Mount: universal SSQA skid steer quick attach
Is This Right For You?
✅ Buy if…
- You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
- You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)
⛔ Skip if…
- Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
- The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)
🔍 Also consider…
- Angle broom for high-speed open-area cleanup where windrow isn't an issue
- Sweeper with water tank if dust suppression is needed
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/tmg-ps72-pickup-broom/
