TMG-DB84 84-Inch Skid Steer Dozer Blade💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on tmgindustrial.ca →
Overview
TMG Industrial's 84-inch dozer blade offers wide coverage grading and leveling for larger skid steers on site prep, road maintenance, and snow clearing work. The hydraulic angle adjustment lets operators push material to either side without dismounting. Sold directly from TMG Industrial Canada.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping.
Key Facts
- Model: TMG-DB84
- Blade width: 84 inches
- Type: dozer blade, hydraulic angle
- Application: grading, leveling, snow clearing
- Drive: hydraulic angle
- Mount: universal SSQA skid steer quick attach
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You need to angle the blade left/right for ditch work, pushback, or casting in a specific direction
- Your site work involves both straight pushing and angled clearing
⛔ Skip if…
- You only push in one direction — a straight blade is lighter, simpler, and cheaper
- Precision finish grading matters — a land plane or box blade gives a better finished surface
🔍 Also consider…
- 6-way blade for hydraulic tilt control in addition to angle
- Box blade if the goal is levelling a surface rather than pushing material
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/tmg-db84-dozer-blade/
