TMG-SB60 60-Inch Skid Steer Rotary Sweeper💚 Budget
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on tmgindustrial.ca →
Overview
The TMG-SB60 is a 60-inch rotary sweeper for skid steers from Canadian manufacturer TMG Industrial — a compact broom suited to smaller-frame machines or jobs where a 72-inch broom won't fit. Common uses include barn aisle sweeping, construction site cleanup in tight areas, and sidewalk sand clearing. Standard flow hydraulics. TMG ships from Canadian distribution warehouses.
Canada Availability
Available direct from TMG Industrial (tmgindustrial.ca) with Canadian shipping.
Key Facts
- Working width: 60 inches
- Type: rotary sweeper
- Hydraulics: standard flow
- Application: tight spaces, barn aisles, compact lots
- Universal SSQA skid steer quick attach mount
- Weight: 250–750 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You need a fast, wide sweep of light debris on open hard surfaces
- Speed and coverage area matter more than containment
⛔ Skip if…
- You need the debris to go a specific direction — a rotary broom's discharge is less directional than an angle broom
- Fine material on wet surfaces may not clear as effectively
🔍 Also consider…
- Angle broom for directional sweeping and windrow control
- Pickup broom if material collection matters
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/tmg-sab60-broom/
