TMG-SB84 84-Inch Skid Steer Rotary Sweeper💚 Budget
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on tmgindustrial.ca →
Overview
The TMG-SB84 is an 84-inch rotary angle broom for skid steers from Canadian manufacturer TMG Industrial. The wider 84-inch sweeping width covers more area per pass — suited to open commercial lots and industrial facilities where the 72-inch TMG-AB72 would require too many overlapping passes. Standard flow hydraulics. TMG ships direct from Canadian distribution warehouses.
Canada Availability
Available direct from TMG Industrial (tmgindustrial.ca) with Canadian shipping.
Key Facts
- Working width: 84 inches
- Rotation: hydraulic-driven rotary broom
- Hydraulics: standard flow
- Application: commercial lots, construction sites, industrial facilities
- Universal SSQA skid steer quick attach mount
- Weight: 350–1050 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You need a fast, wide sweep of light debris on open hard surfaces
- Speed and coverage area matter more than containment
⛔ Skip if…
- You need the debris to go a specific direction — a rotary broom's discharge is less directional than an angle broom
- Fine material on wet surfaces may not clear as effectively
🔍 Also consider…
- Angle broom for directional sweeping and windrow control
- Pickup broom if material collection matters
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/tmg-sab84-broom/
