Virnig V60 84-Inch Pickup Broom for Large Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on virnig.com →
Overview
The 84-inch-inch pickup broom sweeps and collects debris into an internal hopper, eliminating the need for manual raking after each pass. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. Hydraulic conveyor deposits material into a following truck or dumpster. Common on urban construction cleanup and municipal yard maintenance. Available in Canada through Virnig's Canadian dealer network.
Canada Availability
Available in Canada through Virnig's Canadian dealer network.
Key Facts
- Working width: 84 inches
- Type: pickup broom with hopper
- Application: municipal sweeping, construction cleanup
- Mount: universal SSQA
- Weight: 350–1050 lbs
- Hydraulic flow: 20–30 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You need to collect material into a hopper, not just push it aside — cleanup is contained in one pass
- You're cleaning surfaces where side-casting would create a secondary mess (near curbs, drainage, sensitive areas)
⛔ Skip if…
- Capacity is the issue — hopper fills faster than a windrow, meaning more dump cycles on large jobs
- The attachment weight of a pickup broom is a concern on smaller machines (1,100+ lbs loaded hopper)
🔍 Also consider…
- Angle broom for high-speed open-area cleanup where windrow isn't an issue
- Sweeper with water tank if dust suppression is needed
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/virnig-v60-pickup-broom-84/
