Virnig V60 HMPV72 Heavy-Duty 4-in-1 Multi-Purpose Bucket🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
Virnig's V60 HMPV72 is a 72-inch heavy-duty 4-in-1 multi-purpose bucket that functions as a standard bucket, a dozer blade, a clamshell grapple, and a bottom-dump bucket in a single attachment. The clamshell opens 33 inches and the dozer width is 71.9 inches. With 0.25-inch shell and 0.5-inch hinge structure, it's built to handle the rigors of all four operating modes. Additional reinforcement inside the bucket adds durability beyond the standard V50 version. For machines over 2,400 lb lift capacity. Ships to Canada through Virnig dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: HMPV72
- Overall width: 73.5 inches
- Dozer width: 71.9 inches
- Clam opening: 33 inches
- Depth: 37 inches
- Shell thickness: 0.25 inches
- Hinge structure: 0.5 inches
- Structural wear bars: 4
- Weight: 1,100 lbs
- Recommended loader capacity: greater than 2,400 lbs
- Functions: bucket, dozer blade, clamshell grapple, bottom dump
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/virnig-v60-4in1-bucket-72/
