Virnig V60 HCDB84 High Capacity Dirt Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
The Virnig V60 HCDB84 is an 84-inch high-capacity dirt bucket with 27.2 cubic feet heaped capacity. The deep 40-inch bucket profile makes it ideal for moving high volumes of topsoil, mulch, compost, and loose aggregate per pass. Five structural wear bars and a 0.25-inch shell stand up to sustained digging work. For large-frame machines with 2,400+ lb capacity. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: HCDB84
- Overall width: 85.5 inches
- Depth: 40 inches
- Struck capacity: 22.7 cu ft
- Heaped capacity: 27.2 cu ft
- Back angle: 66 degrees
- Shell thickness: 0.25 inches
- Structural wear bars: 5
- Weight: 890 lbs
- Recommended loader capacity: greater than 2,400 lbs
- Mount: universal SSQA
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You move high-volume, low-density material: mulch, wood chips, snow, or loose compost
- You want more cubic yards per pass without exceeding your machine's weight limit
⛔ Skip if…
- Your material is heavy (gravel, soil, rock) — the thin bucket walls will wear fast
- You need a bucket that doubles for digging or grading
🔍 Also consider…
- GP bucket if you split time between light and heavy material
- Snow pusher if snow moving is your primary winter task
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/virnig-v60-high-capacity-dirt-bucket-84/
