Virnig V60 HMPV84 Heavy-Duty 4-in-1 Multi-Purpose Bucket🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on virnigmfg.com →
Overview
The Virnig V60 HMPV84 is an 84-inch heavy-duty 4-in-1 bucket for large-frame skid steers needing maximum versatility from one attachment. At 1,220 lbs, the heavier construction provides the rigidity needed to run as a dozer blade, clamshell grapple, standard bucket, and bottom-dump across demanding applications. 5 structural wear bars and 0.5-inch hinge structure. For machines with 2,400+ lb lift capacity. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: HMPV84
- Overall width: 85.5 inches
- Dozer width: 83.9 inches
- Clam opening: 33 inches
- Depth: 37 inches
- Shell thickness: 0.25 inches
- Hinge structure: 0.5 inches
- Structural wear bars: 5
- Weight: 1,220 lbs
- Recommended loader capacity: greater than 2,400 lbs
- Functions: bucket, dozer blade, clamshell grapple, bottom dump
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/virnig-v60-4in1-bucket-84/
