Virnig V60 HUHV72 Heavy-Duty Utility Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
Virnig's V60 HUHV72 is a 72-inch heavy-duty utility bucket for large-frame skid steers pushing 2,400 lbs and up. With a 66-degree back angle, 4 structural wear bars under the bucket, and 0.25-inch steel shell and side plates, this bucket is designed for aggressive digging and loading work in demanding conditions. Heaped capacity of 23 cubic feet makes it productive on construction and excavation sites. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig ships to Canada through authorized North American dealers.
Key Facts
- Model: HUHV72
- Overall width: 73.5 inches
- Struck capacity: 19.2 cu ft
- Heaped capacity: 23.0 cu ft
- Back angle: 66 degrees
- Shell thickness: 0.25 inches
- Side plate thickness: 0.25 inches
- Structural wear bars: 4
- Weight: 720 lbs
- Recommended loader capacity: greater than 2,400 lbs
- Universal SSQA skid steer mount
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/virnig-v60-utility-bucket-72/
