Virnig V60 HUHV84 Heavy-Duty Utility Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
The Virnig V60 HUHV84 spans 84 inches and delivers 27.1 cubic feet heaped capacity for large-frame skid steers on high-volume earthmoving and loading jobs. Five structural wear bars under the bucket protect against ground wear, while the 66-degree back angle ensures efficient rollback and dump angles. Virnig's V60 line is their most heavy-duty offering, designed for machines above 2,400 lbs capacity. Ships to Canada through authorized dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: HUHV84
- Overall width: 85.5 inches
- Struck capacity: 22.6 cu ft
- Heaped capacity: 27.1 cu ft
- Back angle: 66 degrees
- Shell thickness: 0.25 inches
- Structural wear bars: 5
- Weight: 815 lbs
- Recommended loader capacity: greater than 2,400 lbs
- Universal SSQA skid steer mount
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
Is This Right For You?
✅ Buy if…
- You need one versatile bucket for gravel, soil, concrete chunks, and general debris
- Your machine is mid-frame (S450–S650 class) or CTL
⛔ Skip if…
- You work primarily in rock, frozen ground, or heavy demolition — a rock bucket handles that better
- You need clamshell/4-in-1 functionality
🔍 Also consider…
- Rock bucket if your primary work is shot rock or frozen ground
- 4-in-1 (multipurpose) bucket if you also need occasional grading or clamshell action
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/virnig-v60-utility-bucket-84/
