Berlon Heavy Duty Skid Steer Cement Mixer🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on berlon.ca →
Overview
Berlon Industries' heavy-duty cement mixer is a Canadian-made hydraulic drum attachment engineered for demanding construction work. The Alberta-built drum is reinforced for high-cycle commercial use — fence contractors, foundation builders, and remote-site crews who mix concrete daily. Heavier construction than Berlon's standard mixer with additional drum reinforcement.
Canada Availability
Canadian-manufactured by Berlon Industries (Alberta). Available through Berlon's Canadian dealer network.
Key Facts
- Brand: Berlon Industries
- Type: heavy-duty hydraulic cement mixer
- Construction: reinforced drum for high-cycle use
- Drive: hydraulic motor
- Mount: universal SSQA quick attach
- Manufacturer: Berlon Industries, Alberta, Canada
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from berlon.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You pour continuous large batches — footings, columns, or multiple structures in sequence
- Your crew does daily concrete work and needs a mixer that can keep up with demand all day
- Large-frame skid steer with adequate hydraulic flow to power the drum continuously
⛔ Skip if…
- You pour occasional small batches — a standard mixer handles that without the extra weight and cost
- Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum
🔍 Also consider…
- Standard cement mixer for occasional or small-batch concrete work
- Concrete hopper for pour-only work where mixing is done elsewhere
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/berlon-heavy-duty-cement-mixer/
