Cat Work Tools CM60E Cement Mixer🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on cat.com →
Overview
The Cat Work Tools CM60E is a hydraulic drum cement mixer designed for Cat skid steers and compact track loaders. Ideal for mixing and placing concrete in locations where transit mixers cannot access — footings, fence posts, curb repairs, and remote pads. Cat's heavy-duty construction and corrosion-resistant drum make it a reliable choice for production crews. Available through Cat dealers across Canada.
Canada Availability
Available through Cat dealer locations across Canada. Use the Cat dealer finder at cat.com/en_CA.
Key Facts
- Model: Cat Work Tools CM60E
- Drive: hydraulic motor, standard auxiliary flow
- Mount: Cat skid steer quick attach
- Application: concrete mixing, footings, fence posts, remote slabs
- Compatible with Cat skid steers and compact track loaders
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from cat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You pour continuous large batches — footings, columns, or multiple structures in sequence
- Your crew does daily concrete work and needs a mixer that can keep up with demand all day
- Large-frame skid steer with adequate hydraulic flow to power the drum continuously
⛔ Skip if…
- You pour occasional small batches — a standard mixer handles that without the extra weight and cost
- Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum
🔍 Also consider…
- Standard cement mixer for occasional or small-batch concrete work
- Concrete hopper for pour-only work where mixing is done elsewhere
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Cat in Canada
Caterpillar attachments are backed by the largest dealer network in Canada, with service centres in every major city. OEM quality with the assurance of nationwide parts and support.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/cat-cm60e-cement-mixer/
