Construction Attachments Inc. Skid Steer Concrete Mixer💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on constructionattachments.com →
Overview
Construction Attachments Inc. (CAI) makes a range of skid steer attachments including hydraulic drum concrete mixers. CAI products are distributed across North America including Canada. Their drum concrete mixer uses standard hydraulic auxiliary flow and universal SSQA mounting, compatible with most skid steer brands on Canadian job sites.
Canada Availability
Available through Construction Attachments Inc. dealers serving Canada.
Key Facts
- Brand: Construction Attachments Inc. (CAI)
- Type: hydraulic drum concrete mixer
- Drive: hydraulic motor
- Mount: universal SSQA quick attach
- Application: general construction concrete mixing
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You pour concrete footings, posts, pads, or fill blocks on sites where a mixer truck can't access or isn't cost-effective
- Remote construction, farm buildings, fence posts, or equipment pads where bagged concrete is the realistic supply
- You want to add concrete mixing capability to an existing skid steer without buying a standalone towable mixer
⛔ Skip if…
- You pour large volumes daily — a dedicated towable mixer or ready-mix truck is more efficient
- Your machine is compact — a full drum of concrete is heavy, check your rated operating capacity
🔍 Also consider…
- Heavy-duty cement mixer for large-frame machines and high-volume pours
- Concrete hopper bucket if mixing is done elsewhere and you just need precise pouring
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Construction Attachments in Canada
Construction Attachments Inc. is a US manufacturer of concrete mixers, buckets, and skid steer tooling with distribution into Canada. Their products cover common job site needs and are available through North American equipment dealers.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/construction-attachments-concrete-mixer/
