HLA Skid Steer Concrete Mixer🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on hlaattachments.com →
Overview
HLA Attachments manufactures a concrete mixer for skid steers at their Ontario facility. The hydraulically driven drum mixes and pours concrete for remote footings, fence posts, and small slabs where a transit mixer can't access. HLA is widely distributed across Western Canada through dealers including GLC Equipment. A domestically manufactured choice for Canadian contractors doing small concrete pours in tight locations.
Canada Availability
HLA Attachments are manufactured in Ontario, Canada. Available through GLC Equipment and HLA's dealer network across Western Canada.
Key Facts
- Brand: HLA Attachments
- Type: hydraulic skid steer concrete mixer
- Drive: hydraulic drum
- Application: remote concrete pours, fence posts, footings, small slabs
- Canadian-manufactured
- SSQA skid steer quick attach
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You pour concrete footings, posts, pads, or fill blocks on sites where a mixer truck can't access or isn't cost-effective
- Remote construction, farm buildings, fence posts, or equipment pads where bagged concrete is the realistic supply
- You want to add concrete mixing capability to an existing skid steer without buying a standalone towable mixer
⛔ Skip if…
- You pour large volumes daily — a dedicated towable mixer or ready-mix truck is more efficient
- Your machine is compact — a full drum of concrete is heavy, check your rated operating capacity
🔍 Also consider…
- Heavy-duty cement mixer for large-frame machines and high-volume pours
- Concrete hopper bucket if mixing is done elsewhere and you just need precise pouring
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/hla-cement-mixer/
