HLA Skid Steer Concrete Funnel Bucket🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on hlaattachments.com →
Overview
HLA's concrete funnel bucket holds up to 13 cubic feet of concrete and discharges through a 12x12-inch opening, eliminating the need for wheelbarrows in tight working spaces. At 19 inches deep and 36 inches long, it handles concrete delivery for sidewalks, driveways, and footings. Ontario-manufactured by Horst Welding and available through Langner Equipment in Canada in sizes from 48 to 78 inches.
Canada Availability
Canadian-manufactured by Horst Welding (Listowel, ON). Available through HLA dealers and Langner Equipment in Canada. Pricing on application.
Key Facts
- Working width: 48–78 inch range
- Capacity: up to 13 cubic feet of concrete
- Dimensions: 19" deep x 36" long
- Discharge opening: 12" x 12"
- Application: concrete delivery, sidewalks, footings
- Ontario-manufactured by Horst Welding
- SSQA skid steer quick attach
- Weight: 650–1550 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You need to pour concrete into columns, walls, or forms from height — hoppers give precise pour control
- Your crew mixes on site and pours repeatedly without a concrete truck — hoppers work with a separate mixer
- Tight access sites where a concrete truck can't reach and pour accuracy matters
⛔ Skip if…
- You need to mix the concrete yourself — a rotating drum cement mixer does the mixing and pouring
- Flat slab work with no forms — a bucket or chute is simpler for that application
🔍 Also consider…
- Standard cement mixer if you also need to mix concrete (not just pour)
- Large-capacity cement mixer for high-volume pours
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/hla-concrete-funnel-bucket/
