IronBull Large Capacity Skid Steer Cement Mixer💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on ironbullequipment.com →
Overview
IronBull's large-capacity skid steer cement mixer is designed for full-size machines needing bigger batch volumes. A cost-effective choice for Canadian contractors, this model handles larger production concrete pours for foundations and multiple footings in locations transit mixers can't access. Ships to Canada.
Canada Availability
Available from IronBull (ships to Canada).
Key Facts
- Brand: IronBull
- Type: hydraulic large-capacity cement mixer
- Drive: hydraulic drum motor
- Mount: universal SSQA quick attach
- Application: larger batch concrete mixing, full-size skid steers
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You pour continuous large batches — footings, columns, or multiple structures in sequence
- Your crew does daily concrete work and needs a mixer that can keep up with demand all day
- Large-frame skid steer with adequate hydraulic flow to power the drum continuously
⛔ Skip if…
- You pour occasional small batches — a standard mixer handles that without the extra weight and cost
- Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum
🔍 Also consider…
- Standard cement mixer for occasional or small-batch concrete work
- Concrete hopper for pour-only work where mixing is done elsewhere
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/ironbull-cement-mixer-large/
