John Deere CM60B Concrete Mixer Attachment🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on brandt.ca →
Overview
The John Deere CM60B is a Worksite Pro concrete mixer attachment for John Deere skid steers and CTLs. The hydraulically driven drum mixes and dispenses concrete for post holes, footings, and small pads in locations where truck access is limited. Designed to integrate with John Deere's auxiliary hydraulic controls for clean operation. Available in Canada through Brandt, the national Worksite Pro distributor.
Canada Availability
Available in Canada through Brandt, the national John Deere Worksite Pro attachment distributor.
Key Facts
- Model: CM60B
- Brand: John Deere Worksite Pro
- Type: hydraulic concrete mixer attachment
- Drive: hydraulic
- Compatible: John Deere skid steers and CTLs
- Application: fence posts, footings, small slabs, remote concrete work
- John Deere quick attach mount
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You pour concrete footings, posts, pads, or fill blocks on sites where a mixer truck can't access or isn't cost-effective
- Remote construction, farm buildings, fence posts, or equipment pads where bagged concrete is the realistic supply
- You want to add concrete mixing capability to an existing skid steer without buying a standalone towable mixer
⛔ Skip if…
- You pour large volumes daily — a dedicated towable mixer or ready-mix truck is more efficient
- Your machine is compact — a full drum of concrete is heavy, check your rated operating capacity
🔍 Also consider…
- Heavy-duty cement mixer for large-frame machines and high-volume pours
- Concrete hopper bucket if mixing is done elsewhere and you just need precise pouring
🔧 Machine Compatibility
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/john-deere-cm60b-cement-mixer/
