TMG-SCM60 60-Inch Skid Steer Concrete Mixer💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
View on tmgindustrial.ca →
Overview
TMG Industrial's 60-inch skid steer concrete mixer holds 16 cubic feet and discharges through a side chute for precise placement. The hydraulically driven drum mixes concrete, mortar, or grout on site without needing a transit mixer — well suited for remote fence post footings, small slabs, and pad work on Canadian farms and acreages. Sold direct through tmgindustrial.ca with Canadian shipping.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping and free pickup at select locations.
Key Facts
- Model: TMG-SCM60
- Overall width: 60 inches
- Drum capacity: 16 cubic feet
- Discharge: side chute
- Drive: standard hydraulic flow
- Application: remote concrete pours, fence posts, footings, small slabs
- Universal SSQA skid steer quick attach
Is This Right For You?
✅ Buy if…
- You pour continuous large batches — footings, columns, or multiple structures in sequence
- Your crew does daily concrete work and needs a mixer that can keep up with demand all day
- Large-frame skid steer with adequate hydraulic flow to power the drum continuously
⛔ Skip if…
- You pour occasional small batches — a standard mixer handles that without the extra weight and cost
- Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum
🔍 Also consider…
- Standard cement mixer for occasional or small-batch concrete work
- Concrete hopper for pour-only work where mixing is done elsewhere
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/tmg-scm60-concrete-mixer/
