Werk-Brau Heavy Duty Skid Steer Concrete Mixer🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on werkbrau.com →
Overview
Werk-Brau's heavy-duty concrete mixer is a reinforced hydraulic drum attachment built for high-volume production use on large-frame skid steers. Thick drum walls, robust drum bearings, and sealed hydraulic fittings suit dusty Canadian job sites. Available through Werk-Brau dealers in Canada.
Canada Availability
Available through Werk-Brau dealers in Canada.
Key Facts
- Brand: Werk-Brau
- Type: heavy-duty hydraulic concrete mixer
- Drive: hydraulic drum motor
- Mount: universal SSQA quick attach
- Application: large-frame skid steers, production concrete mixing
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from werkbrau.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You pour continuous large batches — footings, columns, or multiple structures in sequence
- Your crew does daily concrete work and needs a mixer that can keep up with demand all day
- Large-frame skid steer with adequate hydraulic flow to power the drum continuously
⛔ Skip if…
- You pour occasional small batches — a standard mixer handles that without the extra weight and cost
- Your machine is compact or mid-frame — a heavy mixer may exceed lift capacity with a full drum
🔍 Also consider…
- Standard cement mixer for occasional or small-batch concrete work
- Concrete hopper for pour-only work where mixing is done elsewhere
🔧 Machine Compatibility
Best suited to large-frame machines (S750+ class or equivalent CTL). Verify your machine's rated operating capacity (ROC) before ordering.
About Werk-Brau in Canada
Werk-Brau is a well-established US manufacturer with decades of experience building excavator and skid steer attachments. Their products reach Canadian buyers through a solid dealer and distributor network.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/werk-brau-heavy-duty-concrete-mixer/
