Blue Diamond 84-Inch Dozer Blade for Skid Steers⭐ Premium
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on bluediamondattachments.com →
Overview
The Blue Diamond 84-inch Dozer Blade is a heavy-duty 6-Way blade for grading, backfill, and site clearing on mid-to-large skid steers. Hydraulic tilt ±10° and angle ±30°; 22-inch blade height with optional 8-inch extension; 1/2-inch replaceable steel cutting edge; electro-hydraulic dual cylinders; trip lockout for dirt work. Made in the USA. Sold through Blue Diamond's Canadian dealer network.
Canada Availability
Available in Canada through Blue Diamond's Canadian dealer network.
Key Facts
- Working width: 84 inches
- Angle: hydraulic
- Application: backfill, grading, site clearing
- Mount: universal SSQA
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You need hydraulic angle and tilt for full-control grading, ditch work, or road shaping
- You're a contractor doing regular heavy earthwork where blade control speed pays off
⛔ Skip if…
- Basic site clearing is all you need — the hydraulic tilt circuit adds cost and complexity you won't use
- Your machine doesn't have a third hydraulic circuit — 6-way blades need it
🔍 Also consider…
- 4-way blade if tilt control isn't essential for your work
- Motor grader attachment for high-precision grading work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Blue Diamond in Canada
Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/blue-diamond-dozer-blade-84-bd/
