Bobcat 84-Inch Dozer Blade for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on bobcat.com →
Overview
Bobcat's 84-inch dozer blade is a straight push blade for mid-frame to large-frame skid steers doing backfill, spreading, and site rough grading. The blade angles hydraulically left and right for efficient windrow management. Reversible cutting edge extends blade life. Available through authorized Bobcat dealers across Canada.
Canada Availability
Available through Bobcat dealers across Canada.
Key Facts
- Working width: 84 inches
- Angle: hydraulic left/right
- Cutting edge: reversible bolt-on
- Application: backfill, rough grading, site clearing
- Mount: Bobcat Bob-Tach
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from bobcat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
⛔ Skip if…
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
🔍 Also consider…
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/bobcat-dozer-blade-84/
