HLA 60-Inch Dozer Blade for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on hlaattachments.com →
Overview
HLA Attachments' 60-inch straight dozer blade is designed for compact skid steers on residential grading, backfilling, and small site leveling tasks. The 60-inch width suits compact machines working in tight residential lots, around buildings, and in enclosed areas. Ontario-manufactured by Horst Welding for durability through Canadian construction seasons. Available through HLA's Canadian dealer network.
Canada Availability
Available in Canada through HLA Attachments dealers. Ontario-manufactured by Horst Welding.
Key Facts
- Working width: 60 inches
- Type: straight dozer blade
- Manufacturer: Ontario-made by Horst Welding
- Application: compact residential grading, backfilling, enclosed areas
- Mount: universal skid steer quick attach (SSQA)
- Weight: 325–1000 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
⛔ Skip if…
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
🔍 Also consider…
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/hla-dozer-blade-60/
