IronBull 72-Inch Dozer Blade for Skid Steers💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on ironbullinc.com →
Overview
IronBull's 72-inch hydraulic angle dozer blade is a mid-frame option for backfill, land clearing, and site grading on standard full-size skid steers. The hydraulic angle function lets you push material left or right from the cab, which is useful for spreading gravel, windrowing topsoil, or clearing debris to the side. The 72-inch width is a common match for 65–85 HP machines doing residential and light commercial grading work. Universal SSQA mount. Available in Canada through IronBull dealers and direct from IronBull Canada with shipping included.
Canada Availability
Available in Canada through IronBull dealers and online with Canadian shipping.
Key Facts
- Working width: 72 inches
- Angle: hydraulic
- Application: backfill, grading, site clearing
- Mount: universal SSQA
- Weight: 400–1200 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You need to angle the blade left/right for ditch work, pushback, or casting in a specific direction
- Your site work involves both straight pushing and angled clearing
⛔ Skip if…
- You only push in one direction — a straight blade is lighter, simpler, and cheaper
- Precision finish grading matters — a land plane or box blade gives a better finished surface
🔍 Also consider…
- 6-way blade for hydraulic tilt control in addition to angle
- Box blade if the goal is levelling a surface rather than pushing material
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/ironbull-dozer-blade-72-ib/
