Virnig 84 Inch Skid Steer Dozer Blade🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on virnig.com →
Overview
The 84-inch-inch dozer blade pushes gravel, soil, snow, and debris across yards, driveways, and construction sites. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. Angle adjustment lets operators cast material left or right without repositioning the machine. The universal SSQA mount fits most skid steers and CTLs. Available from Virnig Manufacturing (ships to Canada).
Canada Availability
Available from Virnig Manufacturing (ships to Canada).
Key Facts
- Brand: Virnig Manufacturing
- Working width: 84 inches
- Type: hydraulic dozer blade
- Drive: hydraulic float
- Mount: universal SSQA quick attach
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
⛔ Skip if…
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
🔍 Also consider…
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/virnig-dozer-blade-84/
