Virnig V60 72-Inch Dozer Blade for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on virnig.com →
Overview
The 72-inch-inch dozer blade pushes gravel, soil, snow, and debris across yards, driveways, and construction sites. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. Angle adjustment lets operators cast material left or right without repositioning the machine. The universal SSQA mount fits most skid steers and CTLs. Available in Canada through Virnig's Canadian dealer network.
Canada Availability
Available in Canada through Virnig's Canadian dealer network.
Key Facts
- Working width: 72 inches
- Angle: hydraulic
- Cutting edge: reversible
- Application: backfill, grading, site work
- Mount: universal SSQA
- Weight: 400–1200 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You need to angle the blade left/right for ditch work, pushback, or casting in a specific direction
- Your site work involves both straight pushing and angled clearing
⛔ Skip if…
- You only push in one direction — a straight blade is lighter, simpler, and cheaper
- Precision finish grading matters — a land plane or box blade gives a better finished surface
🔍 Also consider…
- 6-way blade for hydraulic tilt control in addition to angle
- Box blade if the goal is levelling a surface rather than pushing material
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/virnig-v60-dozer-blade-72/
