Bobcat 72-Inch Snow Blower Attachment🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on bobcat.com →
Overview
Bobcat's 72-inch snow blower is a high-flow impeller-style blower that throws snow 40+ feet to the side — ideal for Canadian sidewalks, walkways, and tight lots where pushing snow creates access issues. The hydraulically driven auger and impeller handle packed and wet snow common in Canadian winters. Available through authorized Bobcat dealers across Canada.
Canada Availability
Available through authorized Bobcat dealers across Canada.
Key Facts
- Working width: 72 inches
- Type: auger/impeller snow blower
- Drive: high-flow hydraulic
- Throw distance: up to 40+ feet
- Application: sidewalks, lots, tight spaces
- Mount: Bobcat Bob-Tach
- Weight: 300–900 lbs
- Hydraulic flow: N/A - passive attachment
✅ Specs sourced from bobcat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clear flat open lots, loading docks, or laneways and want the lowest-cost blade option
- Your site has a natural drop zone and you push in one direction — no angling needed
- You're adding snow clearing to a machine you already own without a big attachment investment
⛔ Skip if…
- You need to cast snow to one side or work curbed areas — an angle blade handles that better
- You clear large commercial lots — a box pusher moves more snow per pass
🔍 Also consider…
- Angle/trip-edge snow blade for road clearing with directional control
- Box snow pusher for large commercial parking lots
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/bobcat-snow-blower-72/
.jpg)
