Degelman Speedblade 8 Foot Skid Steer Snow Blade🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on degelman.com →
Overview
The Degelman Speedblade 8-foot model is a smaller hydraulic folding wing snow blade from Degelman Industries (Regina, Saskatchewan) for mid-frame skid steers doing commercial parking lot snow removal. The 8-foot size is more maneuverable for tighter lots and urban applications. Canadian-manufactured by Degelman for Prairie snow conditions.
Canada Availability
Canadian-manufactured by Degelman Industries (Saskatchewan). Available through Degelman dealers across Canada.
Key Facts
- Model: Degelman Speedblade 8 foot
- Brand: Degelman Industries, Regina, Saskatchewan
- Type: hydraulic folding wing snow blade
- Width: 8 feet
- Drive: hydraulic wings
- Mount: universal SSQA quick attach
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
✅ Specs sourced from degelman.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clear flat open lots, loading docks, or laneways and want the lowest-cost blade option
- Your site has a natural drop zone and you push in one direction — no angling needed
- You're adding snow clearing to a machine you already own without a big attachment investment
⛔ Skip if…
- You need to cast snow to one side or work curbed areas — an angle blade handles that better
- You clear large commercial lots — a box pusher moves more snow per pass
🔍 Also consider…
- Angle/trip-edge snow blade for road clearing with directional control
- Box snow pusher for large commercial parking lots
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Degelman Industries in Canada
Degelman Industries is a Saskatchewan-based Canadian manufacturer known for heavy-duty tillage and snow management equipment. Built for Prairie conditions — which means they're designed for serious winter loads, heavy soils, and the kind of punishment Canadian agricultural and municipal work dishes out. Parts and service support are Canadian.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/degelman-speedblade-skid-steer-8ft/
