JCB Skid Steer Snow Blade🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on jcb.com →
Overview
The wide-inch snow blade angles and pushes snow from laneways, yards, and parking areas across Canadian winters. JCB attachments are available through Canadian equipment dealers and distributors. Trip-edge design protects the blade and machine when hitting pavement irregularities. Lighter and faster than a bucket for high-volume snow shifting. Available through JCB dealers across Canada.
Canada Availability
Available through JCB dealers across Canada.
Key Facts
- Brand: JCB
- Type: hydraulic snow blade
- Drive: hydraulic angle
- Mount: JCB quick attach (universal compatible)
- Application: road maintenance, parking lot snow removal
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
✅ Specs sourced from jcb.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About JCB in Canada
JCB has a growing Canadian dealer presence and their attachments are designed for their skid steer and compact track loader lineup. JCB dealers can provide both machine and attachment support, and their products are compatible with other brands via adapter plates.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/jcb-snow-blade/
