John Deere Worksite Pro BL10B Snow Blade🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on brandt.ca →
Overview
The BL10B is the largest blade in the Worksite Pro lineup — 10 feet of cutting width suited to high-capacity commercial snow contracts on large open lots, airport aprons, and municipal spaces. At this width, every pass covers serious ground; operators spend more time pushing and less time repositioning. Hydraulic angle windrows to either side on the fly. Trip-edge protection handles the pavement imperfections and hidden curbing that are unavoidable on large commercial sites. Requires a large-frame machine with adequate hydraulic capacity and lift ratings to work safely at full width.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.
Key Facts
- Working width: 10 feet (120 inches)
- Blade type: trip-edge — bottom section pivots on impact, returns to position
- Angle: hydraulic left/right
- Application: large open commercial lots, airport aprons, municipal roads, industrial sites
- SSQA (universal skid steer quick attach) mount
- Compatible with large-frame skid steers and compact track loaders — verify machine lift and hydraulic ratings
- Weight: 425–1300 lbs
- Hydraulic flow: 10–15 GPM
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with compact track loaders and large-frame skid steers (S750+ class). Verify your machine's rated operating capacity (ROC) before ordering.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/john-deere-worksite-pro-bl10b-snow-blade/
