New Holland Skid Steer Snow Blade🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on agriculture.newholland.com →
Overview
The wide-inch snow blade angles and pushes snow from laneways, yards, and parking areas across Canadian winters. New Holland agriculture and construction dealers are spread across all Canadian provinces, providing local support for attachments. Trip-edge design protects the blade and machine when hitting pavement irregularities. Lighter and faster than a bucket for high-volume snow shifting. Available through New Holland dealers across Canada.
Canada Availability
Available through New Holland dealers across Canada.
Key Facts
- Brand: New Holland Construction
- Type: hydraulic snow blade
- Drive: hydraulic angle adjustment
- Mount: New Holland quick attach (SSQA compatible)
- Application: road and parking lot snow removal
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Designed for New Holland machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About New Holland in Canada
New Holland attachments are available through CNH dealer locations across Canada. New Holland has a strong presence in agricultural regions and their attachments are built to match the hydraulic specs of their skid steers and compact track loaders.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/new-holland-snow-blade/
