TMG-SSB108 108-Inch Skid Steer Snow Blade💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on tmgindustrial.ca →
Overview
TMG Industrial offers a 108-inch (9-foot) snow blade for large-frame skid steers, extending their snow blade lineup beyond the 96-inch model. Sold direct to Canadian buyers through tmgindustrial.ca. The 108-inch width is suited to large open driveways, commercial lots, and industrial yards where each pass width reduces total clearing time significantly.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping.
Key Facts
- Working width: 108 inches (9 feet)
- Type: angle snow blade
- Application: large-frame machines, open lots
- Universal SSQA skid steer quick attach
- Weight: 425–1300 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You clear flat open lots, loading docks, or laneways and want the lowest-cost blade option
- Your site has a natural drop zone and you push in one direction — no angling needed
- You're adding snow clearing to a machine you already own without a big attachment investment
⛔ Skip if…
- You need to cast snow to one side or work curbed areas — an angle blade handles that better
- You clear large commercial lots — a box pusher moves more snow per pass
🔍 Also consider…
- Angle/trip-edge snow blade for road clearing with directional control
- Box snow pusher for large commercial parking lots
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/tmg-ssb108-snow-blade/
